SAFETY INSTRUCTIONS
2. Stop switch4. Anti-vibration
system
The stop switch should be
used to stop the engine.Your machine is equipped
with an anti-vibration system
that has been designed to
give as vibration-free and
comfortable usage as
possible.
The use of incorrectly
wound cord or blunt,
incorrect cutting equipment
(incorrect type or incorrectly
sharpened, see section OFiling
the blade�) increases the level
of vibration.
The machineOs vibration
damping system reduces the
transfer of vibrations
between the engine unit/
cutting equipment and the
machineOs handle unit.
WARNING!
Over exposure to vibrations can result in
!blood-vessel or nerve injury to persons
suffering with blood circulation problems.
Seek medical attention if you experience
physical symptoms that can be related to
over exposure to vibrations. Examples of
such symptoms are OnumbnessO, lack of
feeling, OticklingO, OprickingO, OpainO, lack of
3. Cutting
attachment guardor a reduction in normal strength, changes
in the colour of the skin or its surfaces.
These symptoms normally appear in the
This guard is intended tofingers, hands or wrists.
prevent objects from being
thrown towards the operator
and to protect the operator5. Quick-release
from unintentionel contact
with the cutting attachment.There is an easily accessible,
quick-release catch fitted to
the chest as a safety
precaution in the event of a
WARNING!fire in the engine or for any
Do not attach any blade to the unit withoutother situation that requires
!proper installation of all required parts.you to free yourself from the
Failure to use the proper parts can causemachine and harness. See the
the blade to fly off and seriously injure thesection OAdjusting the harness
operator and/or bystanders.and clearing sawO.
Under no circumstances may the cutting
equipment be used without an approved
guard fitted. See the chapter OTechnical
data�. If the wrong guard or a defective
guard is fitted this can cause serious
personal injury.
English � 5 |