TECHNICAL DATA
272XP272XP
EngineNoise levels
3
Cylinder volume, cu.in/cm4,4/72,2Equivalent (see note 1) noise
Cylinder bore, inch/mm2,05/52pressure level at operatorOs
Stroke, inch/mm1,3/34ear, measured according to
Idle speed, rpm2.500relevant international
Recommended max.standards, dB(A).101
speed, unloaded, rpm13.500Equivalent (see note) noise
Power, kW/ rpm3,6/9.300power level, measured
according to relevant interna-
Ignition systemtional standards, dB(A).110
ManufactureElectrolux
Type of ignition systemETVibration levels
Spark plugChampion(See note 2)
2
RCJ 7YFront handle m/s3,2
2
Electrode gap, inch/mm0.020/0,5Rear handle m/s3,9
Fuel and lubricationChain/bar
systemStandard bar length,
ManufacturerTillotsoninches/cm15"/38
Carburettor typeHS 260Recommended bar lengths,
Fuel capacity, US pint/litre1.6/0,75inches/cm15"/38�20"/51
Oil pump capacity at 8500 rpm,Usable cutting length,
ml/min3-6-9-12inches/cm14"/36�19"/48
Oil capacity, US pint/litre0,95/0,45
Type of oil pumpAutomaticChain speed at max.
power, m/sec20,7
Weight
Pitch, inches3/8"
Without bar and chain, Lbs/kg13,9/6,3
Thickness of drive link, inch/mm0.058"/1,5
XPG: 14,3/6,5
Number of teeth on drive
sprocket7
Note 1: Equivalent noise level is, according to ISO 7182 andBar and chain combinations
ISO 9207, calculated as the time-weighted energy total for
The following combinations are CE approved.
noise levels under various working conditions with the following
time distribution: 1/3 idle, 1/3 max. load, 1/3 max. speed.
BarChain
Length,Pitch,Max.Note 2: Equivalent vibration level is, according to ISO 7505,
inchesinchestip radiuscalculated as the time-weighted energy total for vibration levels
under various working conditions with the following time
153/811THusqvarna H42distribution: 1/3 idle, 1/3 max. load, 1/3 max. speed.
163/811THusqvarna H42
183/811THusqvarna H42
203/811THusqvarna H42
L
1
5
TypeInchInch/mmInch/mmAngleAngleAngleInch/mmInch/cm: dl
H423/8"0.058"/1,57/32" /5,5 !6025!10!0.025"/0,6515"/38:56 16"/41:60
18"/46:68 20"/51:72
English � 35 |