TECHNICAL DATA
Technical data322L323L323LD
Engine
3
Displacement, cu. in/cm21,724,524,5
Cylinder bore, inch/mm323434
Stroke length, inch/mm272727
Idling speed, rpm2 7002 7002 700
Recommended max. speed, rpm11 000-11 70011 000-11 70010 000-10 500
Speed of output shaft, rpm8 0148 0148 014
Max. engine output, acc. to ISO 8893,
kW/rpm0,7/ 9 0000,9/ 9 0000,9/ 9 000
Catalytic converter mufflerYesNoNo
Speed-regulated ignition systemYesNoYes
Ignition system
Manufacturer/type of ignition systemWalbro MB 20Walbro MB 20Walbro MB 28
Spark plugChampion RCJ 7Y Champion RCJ 7YChampion RCJ 7Y
Electrode gap, inch/mm0,50,50,5
Fuel lubrication system
Manufacturer/type of carburettorZama C1QZama C1QZama C1Q
Fuel tank capacity, US pint/litres0,50,50,5
Weight
Weight without fuel, cutting tool and
guard, Lbs/kg4,14,14,3
Noise emissions (see note 1)
Sound power level, measured dB(A).108106106
Sound power level, guaranteed LdB(A).110106106
WA
Sound levels (see note 2)
Equivalent sound pressure level at the
userOs ear, measured according to EN ISO
11806 and ISO 7917, dB(A), dB(A),
min/max:92/9891/9790/98
Vibration levels
Vibration levels on the handles, measured
according to EN ISO 11806 and ISO
2
7916, m/s
When idling, left/right handles, min:1,5/1,41,8/1,41,8/1,4
When idling, left/right handles, max:2,0/1,82,8/1,83,5/2,1
At max. speed, left/right handles, min:2,5/4,82,7/5,22,7/5,2
At max. speed, left/right handles, max:4,9/8,07,2/9,87,2/9,8
Note 1: Noise emissions in the environment measured as sound power (L) in conformity with EC directive 2000/14/EC.
WA
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! Noise and vibration measurements are made with all the machineOs approved cutting equipment fitted.
The table indicates the highest and lowest values.
English � 23 |