STARTING AND STOPPING
CAUTION!
Starting and stopping
Do not put any part of your body in marked area. Contact can
result in burns to the skin, or electrical shock if the spark plug
cap has been damaged. Always use gloves. Do not use a
machine with damaged spark plug cap.
WARNING! The complete clutch cover and
shaft must be Ţtted before the machine is
!
started, otherwise the clutch can come loose
and cause personal injury.
Always move the machine away from the
refuelling area before starting. Place the
machine on a �at surface. Ensure the cutting
attachment cannot come into contact with Stopping
any object.
The engine is switched off by moving the stop switch to the
Make sure no unauthorised persons are in
stop position.
the working area, otherwise there is a risk of
serious personal injury. The safety distance
is 15 metres.
Starting
Primer bulb: Press the primer bulb repeatedly until fuel
begins to Ţll the bulb. The bulb need not be completely Ţlled.
CAUTION! The stop switch automatically returns to the start
position. In order to prevent unintentional starting, the spark
plug cap must be removed from the spark plug when
assembling, checking and/or performing maintenance.
Choke: Set the choke control in the choke position.
Hold the body of the machine on the ground using your left
hand (CAUTION! Not with your foot!). Grip the starter handle,
slowly pull out the cord with your right hand until you feel
some resistance (the starter pawls grip), now quickly and
powerfully pull the cord. Never twist the starter cord around
your hand.
Repeat pulling the cord until the engine starts. When the
engine starts. return choke control to run position and apply
full throttle; the throttle will automatically disengage from the
start setting.
CAUTION! Do not pull the starter cord all the way out and do
not let go of the starter handle when the cord is fully extended.
This can damage the machine.
16 � English |